Physically Crosslinked Polyethylene Foam
Physically crosslinked polyethylene foam, also named IXPE foam. Physically crosslinked polyethylene foam that can be produced with advanced technology, have superior mechanical properties and an advanced dimensional stability.
The product is extruded with the help of additives which is followed by the electron beam process. After the electron beam process with hot oven operation the physical characteristic of the product increases by means of dilatation, and a product with a very closed-cell structure and a smooth surface is obtained. It can be produced for different sectors in cut plate, roll, tube, extra-laminated or non-laminated forms.
Advantages
- Odorless
- Lightweight
- Sound Absorbing
- Shock Absorbing
- Moisture Resistant
- Low Water Absorption
- Thermal Insulation
- Easy Fabrication
- Weather Stability
- Chemicals Resistant
- VOC Free
Related Products
4 Inch Thick Irradiation Crosslinked Polyethylene Foam
Waterproof Physically Crosslinked PE Closed Cell Foam
Thermal Insulation Physically Crosslinked PE Foam
Soundproof Cross Linked Polyethylene Foam
Shock Absorbing Closed Cell Foam Material
Closed Cell Crosslinked PE Foam Pipe Insulation
High Temp Insulation Crosslinked Polyethylene Foam
Fire Retardant Crosslinked Polyethylene Foam
Condutive Physically Crosslinked PE Foam
Static Dissipative Closed Cell Polyethylene Foam
Soft Physical Crosslinked Polyethylene Foam
Specification
| Thickness | Density(kg/m3) | ||||||||
| 2mm±0.3 | 179-235 | 105-140 | 77-132 | 60.6-78.7 | 44.4-59.5 | 36-44 | 30.3-37.9 | ||
| 3mm±0.3 | 300-360 | 185-222 | 105-140 | 77-132 | 60.6-72.5 | 44.4-56.2 | 35.1-44.4 | 30.3-37.9 | |
| 4mm±0.3 | 300-360 | 185-222 | 105-140 | 80-132 | 60.6-72.5 | 44.4-56.2 | 35.1-44.4 | 30.3-37.9 | 27-34.7 |
| 5mm±0.3 | 300-360 | 185-222 | 105-140 | 80-132 | 60.6-72.5 | 44.4-56.2 | 35.1-44.4 | 30.3-36.8 | 27-34.7 |
| 6mm±0.3 | 300-360 | 185-222 | 105-140 | 80-132 | 60.6-72.5 | 44.4-56.2 | 35.1-44.4 | 30.3-36.8 | 27-34.7 |
| 7mm±0.3 | 185-222 | 105-140 | 80-132 | 60.6-72.5 | 44.4-56.2 | 35.1-44.4 | 30.3-36.8 | 27-34.7 | |
| 8mm±0.3 | 105-140 | 80-132 | 60.6-72.5 | 44.4-56.2 | 35.1-44.4 | 30.3-36.8 | 27-34.7 | ||
| 9mm±0.4 | 105-140 | 80-132 | 60.6-72.5 | 44.4-56.2 | 35.1-44.4 | 30.3-36.8 | 27-34.7 | ||
| 10mm±0.5 | 105-140 | 80-132 | 60.6-72.5 | 44.4-56.2 | 35.1-44.4 | 30.3-36.8 | 27-34.7 | ||
| Width | ≤1m | ≤1.5m | |||||||
Physical Properties
| Density – Metric Units | kg/m3 | GB/T 6343-2009 | 30±3 | 35±4 | 40±4 | 50±5 | 65±7 | 100±10 | 200±20 |
| Tensile Strength-L | Mpa≥ | GB/T 6344-2008 | 0.25 | 0.3 | 0.39 | 0.42 | 0.75 | 1 | 1.5 |
| Tensile Strength-W | Mpa≥ | GB/T 6344-2008 | 0.2 | 0.22 | 0.33 | 0.35 | 0.63 | 0.83 | 1.25 |
| Tear Strength-L | kN/m≥ | GB/T 1130-2009 | 1.4 | 1.6 | 2 | 2.2 | 3.3 | 4.2 | 6.7 |
| Tear Strength-W | Ncm≥ | GB/T 1130-2009 | 1.7 | 1.9 | 2.4 | 2.8 | 4 | 5 | 8 |
| Elongation-L | %≥ | GB/T 6344-2008 | 170 | 180 | 200 | 210 | 230 | 250 | 300 |
| Elongation-W | %≥ | GB/T 6344-2008 | 150 | 150 | 165 | 180 | 190 | 210 | 250 |
| Variation ratio of dimensional(70°C)-L | %≤ | GB/T 8811-2008 | -8 | -8 | -8 | -6 | -6 | -6 | -6 |
| Variation ratio of dimensional(70°C)-W | %≤ | GB/T 8811-2008 | -6 | -6 | -6 | -4 | -4 | -4 | -4 |
| Compression Strength | Mpa≥ | GB/T 8813-2008 | 0.05 | 0.06 | 0.07 | 0.08 | 0.12 | 0.14 | 0.22 |
| Compression Set(25% 22h) | %≤ | GB/T 6669-2008 | 10 | 10 | 8 | 8 | 6 | 6 | 4 |
| Thermal Conductivity | w∕m•k≤ | GB/T 3399-1982 | 0.035 | 0.04 | 0.045 | / | / | / | / |
| Water Absorption（23°C±2°C） | mg/cm2≤ | GB/T 8810-2005 | 0.5 | 0.5 | 0.4 | 0.4 | 0.3 | 0.3 | 0.3 |
| Noted: “L” means parallel with the length, “W” means parallel with the width. | |||||||||
